How to

How to stick an EGR valve on Renault Clio

Share Resource:

Resource Highlights

In this article, you will find out about how to stick an EGR valve on Renault Clio.

General Maintenance and Tips EGR valves Emissions Vehicle Electronics & Engine Management Guides & Tips How to Technical Tip Distributors Shop Owners Technicians 1 min read

Vehicle Applications

Make	Model	System
Renault	Clio, Modus, Megane, Kangoo 1.5 dCi (2001 to 2005)	Diesel Systems

Summary

Engine running rough or laboring following an extended period of short journeys. This is often caused by soot build-up on the EGR (Exhaust Gas Recirculation) which sticks the valve in the closed or more importantly open condition.

Fault code	Fault	Possible Causes
P0400	No exhaust gas recirculation. Expected performance not reached. Engine goes into limp home mode.	The EGR valve does not open
P0401	Too little exhaust gas is being recirculated	The EGR valve does not open wide enough. Width restricted by impurities (carbonization). EGR valve opening time too short Air mass sensor defective or soiled.
P0402	Excessive exhaust gas recirculation	The EGR valve deviates from the correct point when open. The valve does not close properly. The Air Mass sensor is defective.
P0403	EGR signals wrong or implausible	Wear or soiling of the potentiometer in the EGR valve assembly. The temperature sensor is defective.
P0404	Exhaust gas recirculation is out of correct position. EGR signals are wrong or implausible.	Wear or soiling of potentiometer, pressure sensor, temperature sensor or Air Mass sensor.

Resolution

One of the most frequent causes of problems with EGR valve operation is deposits in the valve or seat.

The valve can be stuck closed, or
deposits have caused the opening width to be reduced, or
the valve does not open completely.

Parts

Part No.	Description
EG10297-12B1	EGR valve (OE No 8200 004 883)
	Please refer to Delphi Vehicle Electronics catalogue for more information

Further Information

Part Number	Description
DDNX122	Renault CR Manuual

Tools & Equipment

Part Number	Description	Operation
YDT278	Sealed Rail kit	Check back leak of injectors
DS100E	Diagnostic tool	Fault Code reader

SIGN UP TO FIND MORE

Fill yp your details to hear more from our experts and get the latest updates from Delphi.

First Name*

Surname*

I have read and accept the Terms of Use and Privacy Policy

I agree to receive personalised marketing emails.

I would like to be kept up to date with promotions/marketing/features/events.

You can change your mind at any time by clicking the unsubscribe link in the footer of any newsletter email you receive from us, or by contacting us at [email protected]